The ESP-RJ45 is not just a simple alarm; it is your anti-jamming insurance. Designed to operate in parallel with your main security system, it takes over instantly if your alarm control panel is neutralized by a radio jammer. Thanks to its direct wired RJ45 connection to your internet router, this module is physically immune to radio attacks that silence wireless alarms.
The strength of the ESP-RJ45 lies in its complete independence from radio signals. It continuously monitors 4 types of security inputs using dry contacts, such as:
As soon as a signal is received, a push notification is sent to your smartphone via the Tuya Smart or Smart Life app. You therefore remain informed of the situation, even if the Wi-Fi and GSM networks are saturated by criminals.
Do not simply endure an intrusion—take action. From your mobile app, the ESP-RJ45 allows you to control 2 control outputs, either manually or automatically, to activate powerful defensive equipment:
Security experts point out that jamming has been the preferred method used by burglars since 2025 to neutralize wireless protection systems.
An all-band jammer (Bluetooth, 2.4 and 5.5 GHz Wi-Fi, Wi-Fi 6E, 433 and 868 MHz alarm control panels, GSM, 3G, 4G, 5G, GPS, etc.) costs only €300!
The ESP-RJ45 addresses this critical vulnerability by adding a wired layer of security that cannot be switched off remotely. It is the only way to ensure that you will be notified and able to activate your countermeasures, whatever happens.
| Power supply | 12V DC |
| Number of inputs | 2 via dry contacts; optocoupler isolation |
| Number of outputs | 2 dry-contact relays (10A max. per relay), COM, NO, NC |
| Communication | Wired RJ45 10/100 Mbps, Bluetooth and Wi-Fi |
| Smartphone applications | Tuya Smart or Smart Life |
| RJ45 cable length | 500 metres max. |
| Protocols | HTTP, MQTT, TCP, RS485 Modbus |
| Mounting | Designed for DIN rail mounting (industrial standard), or with 4 screws |
| Development environments | Compatible with Arduino IDE, MicroPython, ESP-IDF, ESPHome and Home Assistant |
| Communication interfaces | RS485: For the Modbus protocol (GPIO 32/35) I2C: For sensor expansion (GPIO 4/16) 1-Wire: 2 GPIO channels (GPIO 33/14) for temperature sensors (e.g. DS18x20, DHT11) |
| Dimensions | 115 x 90 x 40 mm |
| Weight | 142 grams |
| Water resistance | None |
| Certifications | CE, RoHS |
| Warranty | 2 years |
To learn more about jamming techniques and how to protect yourself completely, consult our Guide to Protection Against Jamming Attacks